Modification honda Supra

Front tire: 100/80-17 IRC
Rear tire: 100/80-17 IRC
Front rim: 1.20 Stream X17
Rear rim: 1.40 Stream X17
GDZH: (0321) 860040

the only remaining original order centerbone sector. This is because Dana does not want to tamper with the existing engine mounting in the frame. The goal is to keep the machine attached to the frame default. "Anyway this is done to maintain the frame number," added the more popular builder Gondez addressed.

Suzuki Satria Supermotor No Chain

It turned out that Bali is not just great to modify the low rider scooter with the flow. This time Agung Darma, builder The 6 Pe from Denpasar presenting his works Suzuki Supermoto and you certainly do not think that the base of the duck's Suzuki Satria 120R Pacung Nang. Remarkably, transfer of power to the rear wheels do not use chains.

For the flow of road this tracker, Great use belts and pulleys to drive the rear wheels. Transfer system is more complicated because of the front gear connected to the sprocket chain is coupled with the front pulley of a given protective plate to protect them from dust and water. Then, a second sprocket mounted on the frame below.

Then, turning round to the back of larger diameter pulleys attached to the rear drum, relying v-belt. "Once the machine bergasing, first front gear pulley rotate the front wear chains with a ratio of 1:1. Then, the front pulley rotate the pulley diameter of 10 cm diameter 27 cm behind," said Agung.

Diameter of pulleys, according to club retainer GPS Bali, has been measured based on the circumference of the front and rear gear ratio is right with the engine power and weight of the motor. Hence, the motor still running good, meskipu damaged road conditions or uphill.

Changing the gender of the duck so this motocross models, the framework also worked on road-style tracker for the composition is pretty good. Moreover, the chassis cradle type is already filled with waste sokbreker Yamaha YZ125 SE follows a triangle and wide handlebars HDS output.

The middle is filled body Yamaha YZ125 custom, although they had to reset the frame for the seat position and seat monosok can Kitaco center. As a result, his work was successfully champion a duck modification Bali One Heart Modification Contezt.

Yamaha V-MAX Leather Regulated

Yamaha recently introduced skin dibaluti moge collaboration with fashion house Hermes, which they christened the V-MAX. Hermes, based in France is not new in the world of two-wheel vehicles and have established 180 years ago that started from a saddle horse.

Hermes task in the V-MAX is covered moge with some of the best ingredients the skin. This idea, according to Yamaha and Hermes to strengthen the lines of a unique object as emotional strength.

The part that is covered here that non-mechanical, like a tank, seat, mudguard, front light until discharge silencer and grip. Finishing Touches also performed on similar materials chrome on glass, instrument panel and the exhaust.

Work Yamaha and Hermes is not the first with V-MAX this. Previously, exactly 15 years ago they had worked on the project seprupa by Virago.

V-Max 1679 cc V4 engine wear 4-valves per cylinder and equipped with the YCC-I for the intakes and YCC-T fly-by-wire dibanderol 300 million more.

My Model Up

On this scooter, the senior modifier offers a new concept. Extra wide rear wheel axle with no rewind. During this time, other modifiers often pegged to the concept that the machine must be backed with large wheels.

can not rewind the wheel axis? Here Big try shifting the position of the engine to the left to 8 cm. This shift makes the handle of a standard engine (engine mounting) unused. Instead, "Created new handle with the shape and size to follow the original model," said the man who hung on H Street Mugeni No. 1, Pisangan, East Jakarta, this.

The shape and frame construction have also been changed completely, the impact of the machine being moved. If you still use the original, Big words, the carburettor will be stuck. Therefore, bone left redesigned.

Big is very keen to use a custom body that resembles Fino. These designs, he said, perfectly suited to the hot rod theme. Only, the front headlights similar to the classical model of the competitors. Hence, when the contest, the lights Honda Scoopy also placed on the motor to reinforce the difference.

Honda Supra Fit Remembering History

Adi Prabowo Magetan Creativity origin, Central Java, not just deserve to be praised. His work reminds us of the history of bike-engined motorcycles. The difference, kitchen pacunya accordance with the development of the present era.

So, in addition to a large machine, the pedal is switched paddle Footstep. indeed, here Adi flashback to history by using the Honda Supra Fit 2009. "I want to look classic bike," he commented.

Some of the detail and body design leads to a form of deliberately made bicycle. All frame and body reorganized by youths aged 19 this year. Here he combines with a Honda C70 original framework that looks at the front.

For the front suspension was also picked from the C70, so that the visible shells. Parents so strong an impression, this section created Such Springer. And according to Adi just view simply because the front suspension remained normal tomorrow.

a few unique design shaped tank fuel reservoir dicontek from the coffin. The lid of the cube, inspired by the recognition of HD community.

Big Scooter" from Malang

skutik modified so big display scooter is hardly easy, especially as happened in 2008 Yamaha Mio Soul Hendry's Chopper from Malang, East Java. Although modifications are not extreme, yet there is a high degree of difficulty in making body.

Hendry was making a big Mio scooter is very challenging. Because, so far he only saw it from a magazine.

The entire body is regenerated from the fiber material, while the dimensions and shapes designed himself. He admitted, "That certainly does not seem fitting for Mio machine."

To raise the body, he backed the rear wheels up to 30 cm. Before the body was made, he first makes the grain. We manufacture, Hendry claimed to have set detail what should be attached so that the body was ready to be installed.

Details are referred to as the main lights and stop lights. Because the body has been stretched, to the front, he picked lighting coincidence Honda Air Blade is owned by a friend who brought him from Thailand. The rear lamps use Sanex Hussar have increasingly emphasized such a big scooter display in Japan and Europe.

Talk framework, this section is not much change, except the tail which then made more menungging. Meanwhile, the adoption of the front damper and the rear of Impac brand Suzuki Satria FU 150.

Modifications Yamaha Nouvo mediocre.

Modifications made his impress on the Yamaha Nouvo mediocre. Understandable, because the concept leads to a drag. Thus, according to the boss's house the X-16 Motor modifications have elements combined with the low rider (Lowdrag).



Aura is a very strong drag on the sector body. Attention to the design style or racing style. "For instance, on the side of the fin is made there must be a kind of thick with the aura of his racing career," explained John.




So also for the model stirrup and exhaust positions. The entire body is made re-use plates. Chromated all looks so futuristic and modern. Interestingly, the model Sein LED lights on the left and right.

To exhaust, undertail-style special design with two shiny snout. According to John, accidentally chromated. Uniquely, alongside the same position lights Sein.






There are still other new things are done John on this Nouvo. Like custom rims with svelte model. But it was characteristic of the drag force. "Actually this is a rim variation with 14 bars. Because you want to get the effect of thin, circumcised lived eight bars. Cross has a size a little thin so strengthening the slim effect

Modification Honda Tiger production 1994

If you have the 1994 Honda Tiger production and bored with the look, can work dicontek Erfan Nurdianto modification of the K-cau Modification (K-CM), Magelang, Central Java, this. Original of this type of motor sport berlambang wing flap was missing, having mixed it with the style of street fighter in certain parts of charm.

As with aft sector, which is shaped like a Ninja 250 because many people diomongin. To change this, of course there rombakannya. According Erfan, spine removed approximately 15 cm so that the tail can be made more nungging.

The execution of the entire body using fiber materials, ranging from front to back. "Only tank system worked condoms, so the original is still in there," said the owner of the motor.

If the rear is inspired from the Ninja 250, to enter the front Erfan Ducati models. So that the display be bigger motor, dibuatkanlah deltabox variation of aluminum material. Consideration, "In addition malleable, let more polished."

Then, the motor what else is pinned on Tiger? Look at the headlights, took from Kawasaki Athlete 125 because not many who apply.

The result, display a custom motorcycle with a pretentious front and back brake system which has disk, so it is fresher and fresher

odification Yamaha Jupiter MX 135LC

Jupiter MX 135LC character somewhat different from the common duck. Vertical engine and body shapes are cool, so by default, with a little touch, the look is so ciamik Yamaha duck. In the hands of the builder Topo Goedhel Atmojo Tauco Custom (TC), MX body become more muscular and sinewy.

Topo accidentally change the MX tongkrongan so very special because the owner came all the way from Bandung. "So, should dibikinkan something special," says modifier, master TC in Kebagusan, Jaksel.

Here, position the tank moved forward and created separate seat. The design is quite unique. Sector so impressed sturdy tanks, pipes made tralis who applied from Ducati. Additional framework that, according to Topo, not just decoration. Function as the holder of the tank.

Machine model of an upright to provide more flexibility when designing the cover. All parts can be said is new and customizing results using 0.8 mm galvanized plate material.

Try lyrics swing arm (swing arm). This homemade because it is the dimension and the model should follow the body shape. If a unique shape like this, hard to match them with the arm swing variations.

Carefulness in the selection of front and rear lights deserve a thumbs up. "Aura sports were in line with Suzuki Arashi 125 lights that do have moge-style model," said Topo

Modification Yamaha Vixion lack and orange colour

Modification Yamaha Vixion lack and orange colour

Modification Yamaha Vixion with accessories shop, black and orange colour in this body Yamaha Vixion.